From self-driving cars to archaeological finds: New SLAM scanner opens new possibilities for 3D documentation

Published 2 November 2026
a mobile screen is held up in front of a man holding a scanner in one hand, pointed against a rock wall
The Slam scanner is used to document a possible prehistoric campsite at Kullaberg. (Photographer: Nicolo dell'Unto)

What does a self-driving car have in common with the Humanities Lab’s new 3D scanner? The answer is SLAM technology, an advanced algorithm-based method that can map out an unknown environment while simultaneously tracking its position within it. Portable and impressively fast, the new SLAM scanner is a welcome addition to the lab’s equipment.

Lund University Humanities Lab has extensive experience in 3D documentation, including 3D scanning, 3D modelling and photogrammetry. When the lab recently expanded its activities through GoLab, a project funded by Riksbankens Jubileumsfond, it was able to invest in new equipment across several of its areas of expertise. Since GoLab aims to provide mobile research technology for collecting data in real-world settings, one of the lab’s investments was a portable SLAM scanner that can easily be taken into the field.

SLAM stands for Simultaneous Localisation and Mapping. Originally developed for robots and self-driving cars, the technology solves a classic chicken-and-egg problem:

“You need a map to know where you are, but you need to know where you are to create an accurate map. SLAM technology solves this problem using sophisticated data algorithms. The sensors used by the SLAM algorithms emit laser beams that measure the distance to everything around the scanner. In addition to the laser sensors, the scanner has three cameras, and the image data from these is combined with the laser measurements. This allows the SLAM algorithms to build a model of the surroundings while the scanner is moving through them”, explains Stefan Lindgren, research engineer at the Humanities Lab.

SLAM technology makes the scanner particularly well suited to mobile fieldwork. It is also considerably faster than many other 3D scanners and can collect large amounts of data across extensive areas in a short period of time. Processing the data afterwards is fast as well. Although its resolution is not as high as that of more high-resolution scanning technologies, the material can be supplemented with data from other tools when necessary. And the SLAM scanner had barely arrived in the lab when an opportunity arose to put it to the test, in combination with other equipment.

“We were contacted by ArchLab, the national research infrastructure for archaeology, about an evaluation they are carrying out at Kullaberg. They needed detailed 3D documentation of sites that are difficult to capture using a single data collection method, so they wanted to combine several complementary methods. The Department of Aviation and Aeronautical Sciences at Lund University’s Faculty of Engineering (LTH) contributed drones, the Lund University Digital Archaeology Laboratory, DARKLab, carried out high-resolution terrestrial laser scanning, and the Humanities Lab put both our SLAM scanner and our new GPS system, also part of GoLab, to their first real test”, says Stefan.

The project, Kullaberg and the dawn of maritime lifeways – tracing northern pioneers, led by Adam Boethius at the Department of Archaeology and Ancient History at Lund University, aims to find traces of the first people to reach Kullaberg in north-western Skåne after the Scandinavian ice sheet began to retreat around 17,000 years ago. Researchers are looking for evidence of the hunter-gatherers who moved through the area and who may have reached it using small, kayak-like boats.

“The researchers are not looking for permanent settlements, but rather temporary campsites that may have been used during hunting trips and for processing game”, Stefan explains.


Seventeen thousand years ago, the sea level at Kullaberg was 45 metres higher than it is today. This means that much of the material the archaeologists are searching for is now located on inaccessible cliff faces or in very steep areas. The material is therefore likely to be relatively undisturbed, but reaching it poses considerable practical and logistical challenges.

“That made our equipment ideal for the job, because both the SLAM scanner and the GPS equipment are relatively easy to carry, even when you must climb steep slopes and make your way through difficult terrain. The SLAM scanner allowed us to document caves and other complex environments quickly, in places where more conventional ground-based or airborne data collection is difficult. Drones, for example, have trouble photographing extremely steep terrain, so we could use the SLAM scanner to collect complementary data in those areas”, says Stefan.

The Humanities Lab’s task was to document three different sites where excavations will later take place. The environments were recorded using the SLAM scanner, and surveyed with the new GPS system, which has a built-in correction system that enables measurements with centimetre-level accuracy. The 3D data from the scans will be linked to the GPS measurements to produce a 3D model with precise spatial coordinates on a map, a process known as georeferencing. Combined with data from drones and terrestrial laser scanning, the aim is to create a 3D dataset that brings together landscape data with detailed documentation of archaeological remains and caves. This in turn makes it possible to explore relationships between archaeological remains and the surrounding terrain at different scales, and to identify areas that require closer investigation.

“You can generate an enormous amount of data by combining different types of equipment. For us, this was also a valuable opportunity to put our new equipment to the test straight away in a real research project, working with real-world data”, says Stefan.

Beyond archaeology

Archaeology is not the only field in which the SLAM scanner can be useful. The Humanities Lab recently received a request from the Ingvar Kamprad Design Centre (IKDC), part of Lund University’s Faculty of Engineering, to use the scanner in a student project documenting different civil defence shelters in Sweden. The scans will be used to create 3D environments that can be explored through a VR headset, providing insight into how the shelters are designed and how they function. The scanner’s portability also makes it easy to capture the area outside the shelters, so the resulting 3D model can show the interior but also the approach to the shelters and how to enter them.

“A scan like that will take about fifteen minutes to capture and a few hours to process. With our old equipment, it would have required a full day just to collect the data, followed by a week of post-processing. So the major advantage of the SLAM scanner is its speed. It makes it very easy to collect the basic data you need”, says Stefan.

The potential applications are wide-ranging. According to Stefan, virtually any research involving three-dimensional spaces could potentially benefit from the SLAM scanner. The challenge is that researchers who are unfamiliar with the technology may not realise that it could be useful to them.

“We can’t invent research questions for researchers. They must recognise themselves that this equipment could be useful for their research. And they should know that they don’t have to apply for funding to buy the equipment themselves; it’s already here at the Humanities Lab and available to use. We do not know of anyone else at Lund University having a SLAM scanner yet, so we may get a queue. That could be exciting!”